Conquest Pro
800 XTX 8x8

A WORK PARTNER THAT'S TOUGH AS YOU.

The ARGO Conquest Pro 800 XTX 8x8 is not only the heavy-duty workhorse, but it brings its KX 800 EFI liquid-cooled V-Twin engine and durable rear cargo box with tilt assist to take on any obstacle. Fill up the cargo box with your gear or materials, and let's get after it.

The Conquest Pro 800 XTX is built to rock and roll every day with its unmatched Admiral transmission and keep you safe with our certified Roll-Over Protection Structure (ROPS). This machine exudes confidence and is ready to crush challenges with a sense of adventure. If you need a trusted work partner that adds excitement to the daily grind, the Conquest Pro 800 XTX should be your next hire. No doubt about it. Let the Conquest Pro 800 XTX lead the way safely with its monster performance and unmistakable hard-work ethic.

$59,499

Plus a destination charge of $2,000, setup, applicable taxes and registration fees.

Color Options

ENGINE	KX 800
CYLINDER	V-TWIN
FUEL SYSTEM	EFI
COOLING	LIQUID COOLED
HOOD FAN	N/A
ALTERNATOR OUTPUT (MAX)	60 AMPS
CHASSIS	8X8
SERVICE BRAKES	HYDRAULIC
STEERING BRAKES	HYDRAULIC
AUTO CHAIN LUBRICATION	STANDARD
BRAKE COOLING KIT	N/A
TRANSMISSION	ADMIRAL
DRIVE BELT	HEAVY DUTY
EASY ACCESS GREASE SYSTEM	STANDARD
FULL SKID PLATE	STANDARD
BRUSHGUARD	STANDARD
WINCH	4000 lb.
FRONT RACK	STANDARD
REAR RACK	N/A
BILGE PUMP	STANDARD
ROPS	STANDARD
REAR MESH	STANDARD
ROOF	STANDARD
POWER DUMP BOX	STANDARD
LOAD CAPACITY - LAND	848 lb. (385 kg)
LOAD CAPACITY - WATER	148 lb. (67 kg)
TOWING CAPACITY	2,000 lb. (907 kg)
SEATING CAPACITY - LAND	2
SEATING CAPACITY - WATER	2
FUEL CAPACITY	8.5 gal (32 L)
SPEED - LAND	12 mph (19 Km/h)
WATER CAPABILITY	WATER FORDING
WEIGHT	2,252 lb. (1,021 kg)
LENGTH (includes winch when standard)	125 in (3,175 mm)
WIDTH	65 in (1,651 mm)
HEIGHT	80.5 in (2,045 mm)
AXLE BEARING EXTENSIONS	N/A
TIRES	ARGO XT119 25X12-9
WHEEL	STEEL BEADLOCK
GROUND CLEARANCE (TIRES)	9 in (229 mm)
GROUND CLEARANCE (TRACKS)	10 in (254 mm)
GROUND PRESSURE (18" RUBBER TRACKS)	1.06 psi (7.3 kPa)
WARRANTY	1 YEAR OR 1,000 OPERATION HOURS
COLORS	YELLOW, BLACK

KX 800 Engine

The V-Twin, 4-stroke KX 800 engine is liquid-cooled and equipped with Electronic Fuel Injection (EFI). Both engines deliver reliable performance in all temperatures and climates.

Drivetrain

The ARGO Instant Torque Drive System (ITDS) delivers outstanding performance by coupling the trusted ARGO Instant Torque Clutch (ITC) with the bulletproof Admiral transmission to deliver increased acceleration and enhanced torque.

Transmission

The ARGO Admiral transmission uses a sophisticated gearing system and triple differentials located on the output shafts. The braking force is applied to a steering differential vs. to the output shafts, translating into smoother and gentler steering.

25" Mud Tires on Beadlock Steel Rims

The Conquest XTX has 25” XT119 ARGO-only mud tires with Beadlock steel rims. The chevron treads maximize your power in thick mud and increase your propulsion in whatever waterway you decide to drive in.

Reduced Underhood Temperature

To ensure comfort for the operator and passengers, heat-reflective and absorptive material is integrated into the firewall. A composite exhaust shroud goes one step further and effectively redirects heat while producing a subtle note from the exhaust.

Fully Enclosed Body

The one-piece, high-density polyethylene (HDPE) lower body is ARGO’s signature design feature. The smooth and durable underbody allows for up to 26” of water fording while going over potential snags, stumps and outcrops delivering unparalleled stability and safe navigation.

Front Brush Guard & Winch

Pulling power for when you need it most. The front winch comes standard on all Conquest Pro models with 4,000 lb capacity. Mounts front or back to assist with high-angle extractions of equipment or debris.

Roll-Over Protective Structure (ROPS)

For unpredictable and extreme terrain, add additional protection for your ARGO XTV. Roll-Over Protective Structure (ROPS) provides additional peace of mind when the terrain gets hairy.

Hood Rack

The Conquest Pro has a heavy-duty steel front hood rack to bring all the things you need to make your adventure safe and rewarding. Wherever you go, make sure you go where others can't.

Rear Cargo Box with Tilt Assist

The Conquest Pro XTX solid steel rear power cargo box can move bulk loads with a capacity of 1,000 lbs. (454 kg). Load up the 44 in/1,117.6 mm x 52 in/1,320.8 mm x 12.5 in/317.5 mm (LxWxH) cargo box with heavy tools, gravel or a cooler full of water for your team. Be safe out there.

Automatic Chain Lubrication System

Designed to automatically lubricate the reinforced drive chains after timed intervals of operation, operators obtain the peace of mind they deserve while properly lubricating the machine over extended periods of time.