A COMMUTE FILLED WITH THE UNEXPECTED.
If you’re enjoying the looks of this machine, there’s a good chance you don’t have one of those jobs that requires you to slip on a pair of pressed trousers and drive to work in a cushy sedan. No, the ARGO Conquest 800 XT-X is about handling those crusty commutes filled with villainous swamps, water, sludge, rocks, snow, ice, logs and uneven everything.
And once there, this workhorse keeps going until the work’s done. The Conquest 800 XT-X is equipped with our dependable KX 800 V-Twin engine, Instant Torque Clutch (ITC) and the power dump box to make it easier to haul and unload effectively. Plus, added safety with ROPS for you and your passenger. Yes, with this sturdy ride taking you to places most never see, you might just be tempted to whistle while you work.
|ALTERNATOR OUTPUT (MAX)||60 AMPS|
|AUTO CHAIN LUBRICATION||STANDARD|
|BRAKE COOLING FAN||ACCESSORY|
|FULL SKID PLATE||STANDARD|
|WINCH||4500 LB WINCH|
|POWER DUMP BOX||STANDARD|
|LOAD CAPACITY - LAND||848 lb (385 kg)|
|LOAD CAPACITY - WATER||NOT AMPHIBIOUS|
|TOWING CAPACITY||2,000 lb (907 kg)|
|SEATING CAPACITY - LAND||2|
|SEATING CAPACITY - WATER||N/A|
|FUEL CAPACITY||8.5 gal (32 L)|
|SPEED - LAND||12 mph (19 Km/h)|
|SPEED - WATER||N/A|
|WEIGHT||2,252 lb (1,021 kg)|
|LENGTH (includes winch when standard)||125 in (3,175 mm)|
|WIDTH||65 in (1,651 mm)|
|HEIGHT||80.5 in (2,045 mm)|
|AXLE BEARING EXTENSIONS||N/A|
|TIRES||ARGO XT119 25X12-9|
|GROUND PRESSURE (18" RUBBER TRACKS)||1.06 psi (7.3 kPa)|
|GROUND CLEARANCE (TIRES)||9 in (228 mm)|
|GROUND CLEARANCE (TRACKS)||10 in (254 mm)|
|COLORS||GREEN, INDUSTRIAL YELLOW|
KX 800 Engine
This KX 800 V-Twin Liquid Cooled engine provides the perfect balance of horsepower and torque. Available on Aurora and Conquest Series.
Instant Torque Clutch (ITC)
The ARGO Instant Torque Drive System (ITDS) dramatically improves low-end torque and increases acceleration. The Instant Torque Clutch (ITC) is designed to provide the optimal gear ratio, shifting seamlessly throughout the full range to utilize the massive torque and power of our engines.
The ARGO Admiral transmission uses complex gearing, including dual differentials on the output shafts. When steering, the braking force is not applied to the output shafts but to a steering differential, which translates to a vastly different driving experience.
While steering in high gear, the output shafts rotate at a 3:1 ratio, yielding smoother, gentler steering events. Selecting low range enables operation similar to a traditional skid steer vehicle offering a zero-radius turn.
25" Mud Tires on Beadlock Steel Rims
The Conquest XTX has 25” XT119 ARGO-only mud tires with Beadlock steel rims. The chevron treads maximize your power in thick mud and increase your propulsion in whatever waterway you decide to drive in.
Reduced Underhood Temperature
To ensure comfort for the operator and passengers, heat-reflective and absorptive material is integrated into the firewall. A composite exhaust shroud goes one step further and effectively redirects heat while producing a subtle note from the exhaust.
Winch and Brushguard
Pulling power for when you need it most. The 4,500-lb winch mounts on the front of your ARGO brushguard to assist with high-angle extractions of equipment or debris.
Roll-Over Protective Structure (ROPS)
For unpredictable and extreme terrain, add additional protection for your ARGO XTV. Roll-Over Protective Structure (ROPS) provides additional peace of mind when the terrain gets hairy.
Power Cargo Box
The Conquest Pro XT-X solid steel power cargo box can move bulk loads with a capacity of 1,000 lbs. (450 kg).
Auto Chain Lubrication
Simplifying routine maintenance, the auto chain lubrication disperses oil automatically onto your machine’s chain driven system at intervals of 5 seconds every 60 minutes of operation. This process alleviates the need to manually grease your chains at scheduled intervals while providing satisfactory lubrication at all times.